The concept behind Essence PLUS was an extremely glossy, semi-permanent nano-agent for repairing durable ceramic coatings, which may have been abused or mistreated over the course of time!

Essence PLUS is the first non-abrasive solution to repair fine swirls, for when an abrasive correction is not the best way to go. Essence PLUS cleanses the surface, leaving behind hydrophobic properties and a "smooth as glass" feel.

Features:
High gloss jeweling coat.
Repairs nano coatings.
Incredible on bare paint!
Adds layer of SiO2 Quartz protection.
Excellent hydrophobic agent.
Produces extreme gloss.
Use with D/A or by hand.
Cleans, glosses, and protects: Bare paint, PPF, chrome, and glass.
Formulated for professional use on previously coated vehicles.

Preparation:
1. Wash with Reset, and decontaminate with IronX, Spotless, and if needed TarX. Wash and rinse thoroughly.
2. Dry vehicle and wipe down with CARPRO Eraser for clean oil free surface.

Via Dual Action Polisher:
1. Prime CARPRO Gloss Pad with Essence Plus.
2. Apply with no pressure in multiple overlapping passes on speed 1-3 across 24” x 24” (60cm x 60cm) section.
3. Clean pad with brush and apply 3 pea size drops to the pad.
4. Move to next section and repeat steps 2-3.
5. Continue around entire vehicle in this manner and do not wipe off the residue until at least 30 minutes later.
6. Wipe excess residue off of entire vehicle.

Via Hand: 
1. Wash and dry vehicle.
2. Apply a few pea size dots of Essence Plus to the applicator.
3. Apply in overlapping figure circular motions across 24” sq. +/- and work into surface similar to a “polymer sealant” (liquid wax) application method.
4. Move to next section and repeat steps 2-3.
5. Continue around entire vehicle in this manner.
6. Allow to cure for at least an hour.
7. Wipe excess residue off of entire vehicle. 

Precautions:
•      On coated surfaces – If using machine, use only with CARPRO Gloss Pad.
•      On coated surfaces - Avoid “edging” pad into a curve and keep pad flush with paint.
•      Keep container tightly closed after use.
•      Keep container out of the sun.
•      Test product on inconspicuous area before use.
•      Store in cool dry place.
•      Keep away from children.
•      Do not ingest.
•      Not for use as a primer.

Expected to be most commonly utilized as a solution for clients seeking aggressive decontamination services, Essence PLUS can easily repair and protect against marring caused by heavy claying or synthetic clay discs in one step. While this may not be the preferred method for all scenarios, it has proven to be an effective solution for a widely experienced challenge.

 

This is not like CARPRO Essence, it's a completely different product. It offers numerous advantages, such as being non-abrasive and highly hydrophobic. Unlike Essence, it is not a primer and can even be used on top of a damaged coating.

 

CARPRO | Essence PLUS and CARPRO Essence both feature Sio2 coatings with filling capabilities. However, Essence PLUS takes it a step further by also repairing existing damaged coatings through a build-up process, while Essence relies mostly on abrasives and partially on Sio2 coating for leveling.

 

Can Essence Plus and Reload be used on top of Essence? Yes! Can Reload be applied on top of Essence Plus? Yes!

 

Please note that Essence Plus is not a primer like Essence, it should not be used underneath CQUARTZ. If used together, Essence Plus should be applied on top of the coating, rather than underneath. This product serves as a non-abrasive gloss agent and will not bond coatings when applied on top.