Due to California C.A.R.B. regulations we are prohibited from selling CarPro Eraser to California.
Ensure that your vehicle is incredibly well protected and save big! This kit contains:
- CARPRO Cquartz UK 3.0 Edition - 30 ml or 50 ml
- CARPRO Eraser Oil & Polish Remover & Glass Cleaner - 500 ml
- Autofiber Thin Saver Applicator Sponge - 3 Applicators
- Autofiber Quadrant Wipe Coating Towel - 3 Towels
CARPRO CQUARTZ UK 3.0 EDITION
We’ve worked tirelessly on this since 2017 and we’re excited finally announce CQUARTZ UK Edition 3.0! We’ve increased the resistance to road salt build up, while keeping the same great chemical resistance of pH 3~14. We listened to you when you told us it had to be easy to use, this added a few extra months to our process but we know you’ll love it. For the first time ever CQUARTZ UK 3.0 is easy from 3oC up to 40oC! Keeping with the classic CQUARTZ UK wipe on wipe off application it can be buffed immediately or left on few minutes while still buffing off super clean and easy. For enthusiastic car lovers or Pro detailers, both same most easy to use coating without sticky surface or grabby wipe off! As you would expect from CARPRO we’ve stuck to our ethos, of under promising and over delivering so as with all our coatings we will give you a conservative real world durability, in this case it’s 18-24 months on CQUARTZ UK Edition 3.0.
CARPRO ERASER OIL AND POLISH REMOVER AND GLASS CLEANER
CARPRO Eraser is an intensive cleaner to remove oils, silicones, and polishing dust from all hard vehicle surfaces to ensure maximum bonding performance of protection products, including the CQuartz line of Nanotechnology coatings. Eraser can also be used as a post-polish inspection fluid to remove fillers and product residues, as well as a cleaner for automotive glass to remove heavy nicotine or traffic films. Eraser's special blend of alcohols and surfactants is safe to use on delicate surfaces, and contains no harmful petroleum distillates.
AUTOFIBER THIN SAVER APPLICATOR SPONGE
The main complaint about microfiber applicators is that they absorb too much product. Over the past few years, as expensive coatings have taken over the industry, the complain has only grown. Microfiber applicators make coating product application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick - flow easier) so they soak through the microfiber to the sponge, wasting valuable product.
Our solution to this problem is the Saver Applicator. We have added a layer of a hydrophobic material between the microfiber and sponge. This prevents excess coating product from soaking through the microfiber into the sponge, ensuring that you get the most out of every bottle of coating. It also limits excess product buildup which can become gummy and tacky as the coating begins to cure.
AUTOFIBER QUADRANT WIPE MICROFIBER COATING LEVELING TOWEL
When applying a ceramic coating the residual product removal (or leveling) stage is essential. The process removes high/low spots and ensures that the coating cures properly with evenness and clarity.
When leveling coatings it is important to wipe with a clean towel surface. As the coating that is removed from the paint surface, it begins to harden and cure in the towel fibers. The hardened fibers can scratch.
Most coating installers know that they can maximize their towel performance by folding the towel twice to get eight 8"x8" sections. As each side is used the ceramic coating applicator cloth is flipped and re-folded to a clean towel section.
It can become confusing and easy to forget which side has or hasn't be used. We have had many coating installers ask us for a solution to this problem. This is our solution. Each quadrant of the ceramic coating applicator cloth is printed 1 through 8 so that the detailer can keep track of the sides as they have been used for leveling.
Due to California C.A.R.B. regulations we are prohibited from selling CarPro Eraser to California.
Ensure that your vehicle is incredibly well protected and save big! This kit contains:
- CARPRO Cquartz UK 3.0 Edition - 30 ml or 50 ml
- CARPRO Eraser Oil & Polish Remover & Glass Cleaner - 500 ml
- Autofiber Thin Saver Applicator Sponge - 3 Applicators
- Autofiber Quadrant Wipe Coating Towel - 3 Towels
CARPRO CQUARTZ UK 3.0 EDITION
We’ve worked tirelessly on this since 2017 and we’re excited finally announce CQUARTZ UK Edition 3.0! We’ve increased the resistance to road salt build up, while keeping the same great chemical resistance of pH 3~14. We listened to you when you told us it had to be easy to use, this added a few extra months to our process but we know you’ll love it. For the first time ever CQUARTZ UK 3.0 is easy from 3oC up to 40oC! Keeping with the classic CQUARTZ UK wipe on wipe off application it can be buffed immediately or left on few minutes while still buffing off super clean and easy. For enthusiastic car lovers or Pro detailers, both same most easy to use coating without sticky surface or grabby wipe off! As you would expect from CARPRO we’ve stuck to our ethos, of under promising and over delivering so as with all our coatings we will give you a conservative real world durability, in this case it’s 18-24 months on CQUARTZ UK Edition 3.0.
CARPRO ERASER OIL AND POLISH REMOVER AND GLASS CLEANER
CARPRO Eraser is an intensive cleaner to remove oils, silicones, and polishing dust from all hard vehicle surfaces to ensure maximum bonding performance of protection products, including the CQuartz line of Nanotechnology coatings. Eraser can also be used as a post-polish inspection fluid to remove fillers and product residues, as well as a cleaner for automotive glass to remove heavy nicotine or traffic films. Eraser's special blend of alcohols and surfactants is safe to use on delicate surfaces, and contains no harmful petroleum distillates.
AUTOFIBER THIN SAVER APPLICATOR SPONGE
The main complaint about microfiber applicators is that they absorb too much product. Over the past few years, as expensive coatings have taken over the industry, the complain has only grown. Microfiber applicators make coating product application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick - flow easier) so they soak through the microfiber to the sponge, wasting valuable product.
Our solution to this problem is the Saver Applicator. We have added a layer of a hydrophobic material between the microfiber and sponge. This prevents excess coating product from soaking through the microfiber into the sponge, ensuring that you get the most out of every bottle of coating. It also limits excess product buildup which can become gummy and tacky as the coating begins to cure.
AUTOFIBER QUADRANT WIPE MICROFIBER COATING LEVELING TOWEL
When applying a ceramic coating the residual product removal (or leveling) stage is essential. The process removes high/low spots and ensures that the coating cures properly with evenness and clarity.
When leveling coatings it is important to wipe with a clean towel surface. As the coating that is removed from the paint surface, it begins to harden and cure in the towel fibers. The hardened fibers can scratch.
Most coating installers know that they can maximize their towel performance by folding the towel twice to get eight 8"x8" sections. As each side is used the ceramic coating applicator cloth is flipped and re-folded to a clean towel section.
It can become confusing and easy to forget which side has or hasn't be used. We have had many coating installers ask us for a solution to this problem. This is our solution. Each quadrant of the ceramic coating applicator cloth is printed 1 through 8 so that the detailer can keep track of the sides as they have been used for leveling.