Pure:est C2 is our lubricant specially made for reducing the friction when using the Pure:est C1 Clay bar on your paint. Reduced friction equals better result and less dullness in the paint. Why should you use a clay bar? Our vehicles are exposed to more kinds of contaminants than one could imagine. Even though the car may seem spotless after a thorough detail there will still be microscopical contaminants that are etched into the clear coat. The only method of removing these particles is to work with a clay bar.

The stickiness of the clay drags the contaminants from the paint and you will quickly see within the clay how effective this is. Does it matter if you can’t see it though? Yes! It’s key to do this step before polishing since these particles will obstruct the polishing process and the result will not be as good. To achieve stunning polishing results, a fully decontaminated surface is an absolute necessity.

Keep in mind that this is intended to be used prior to polishing the car. Hence why the surface may be dulled to a degree after using the clay bar.

To reduce the loss of gloss we recommend to use the Pureest C2 in conjunction with the C1 to ensure that the surface is fully lubricated ro reduce friction. Don’t use the C1 and C2 in direct sunlight and make sure to wear gloves.

How to use:

Make sure the car is thoroughly clean.
Apply the C2 lubricant spray to both the clay and the surface.
Work the clay over the whole paint in cross-hatch motions, if the clay bar is full of grime, simply fold it and drag it out again.
Wipe off the C2 and get started with polishing!

Both products are made in Sweden with love.

Color: Light Blue.
Scent: Pure:est signature scent.
Nozzle: Spray trigger.
Dilution: This product can be diluted with water. Avoid storing the product in freezing conditions.
Other: None of our products contain PFAS (high fluorinated agents)