Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
The metal polish you've been waiting for has arrived! With MetalliCut, CarPro set out to redefine the limits of a metal polish and we believe they have! No expense was spared in the design of MetalliCut... With diamond abrasive powders to compliment the diminishing abrasive compound, CarPro created a fast cutting metal polish that finishes down to an extreme gloss! Not only does MetalliCut save time and produce superior results in general but is safe even on soft metals!
MetalliCut is the go to metal polish for professional detailers and enthusiasts looking to improve or perfect their exhaust tips, chrome or aluminum wheels, bumpers and metal trim! For a better than new shine, pair MetalliCut with your machine polisher and one of our polishing pads!
Bring on the Shine and get a bottle of MetalliCut today!
Features:
- Diamond & Diminishing abrasives
- Produces an extreme shine!
- Effective on all types of metals including stainless steel, aluminum, and chrome
- Can be used by hand or machine
- Safe on soft metals
- Easy to use
Directions:
By hand:
- Apply a small amount of MetalliCut to an All Purpose Microfiber Terry Towel or wire wool depending on the metal type and goal
- Using firm pressure, work Metallicut into the metal surface until the product becomes less opaque
- Use an All Purpose Microfiber Terry Towel or Eagle Edgeless 500 Microfiber Towel to buff away any additional residue
- Repeat steps 1-3 if necessary
By machine:
- Apply 6-8 drops of MetalliCut to a firm foam polishing pad
- Spread MetalliCut on the surface at speed 1-2
- Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved
- Using a clean All Purpose Microfiber Terry Towel or Eagle Edgeless 500 Microfiber Towel, remove excess residue
- Repeat steps 1-3 as necessary
By foam cone or buffing ball:
- Apply a liberal amount of MetalliCut to the chosen tool.
- Spread MetalliCut at low speed.
- Increase the speed of the drill and use a medium to high speed until the abrasives are broken down
- Using a clean microfiber towel, remove excess residue
- Repeat steps 1-3 as necessary
Earn [points_amount] when you buy this item.
Availability
Free shipping over $125. Code: FREESHIP
Earn Reward Points With Every Order
Quantity selected exceeds current stock
Shipping calculated at checkout.
Pairs well with
100% Secure payments
Your details are protected and safe with us.
Adding product to your cart
The metal polish you've been waiting for has arrived! With MetalliCut, CarPro set out to redefine the limits of a metal polish and we believe they have! No expense was spared in the design of MetalliCut... With diamond abrasive powders to compliment the diminishing abrasive compound, CarPro created a fast cutting metal polish that finishes down to an extreme gloss! Not only does MetalliCut save time and produce superior results in general but is safe even on soft metals!
MetalliCut is the go to metal polish for professional detailers and enthusiasts looking to improve or perfect their exhaust tips, chrome or aluminum wheels, bumpers and metal trim! For a better than new shine, pair MetalliCut with your machine polisher and one of our polishing pads!
Bring on the Shine and get a bottle of MetalliCut today!
Features:
- Diamond & Diminishing abrasives
- Produces an extreme shine!
- Effective on all types of metals including stainless steel, aluminum, and chrome
- Can be used by hand or machine
- Safe on soft metals
- Easy to use
Directions:
By hand:
- Apply a small amount of MetalliCut to an All Purpose Microfiber Terry Towel or wire wool depending on the metal type and goal
- Using firm pressure, work Metallicut into the metal surface until the product becomes less opaque
- Use an All Purpose Microfiber Terry Towel or Eagle Edgeless 500 Microfiber Towel to buff away any additional residue
- Repeat steps 1-3 if necessary
By machine:
- Apply 6-8 drops of MetalliCut to a firm foam polishing pad
- Spread MetalliCut on the surface at speed 1-2
- Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved
- Using a clean All Purpose Microfiber Terry Towel or Eagle Edgeless 500 Microfiber Towel, remove excess residue
- Repeat steps 1-3 as necessary
By foam cone or buffing ball:
- Apply a liberal amount of MetalliCut to the chosen tool.
- Spread MetalliCut at low speed.
- Increase the speed of the drill and use a medium to high speed until the abrasives are broken down
- Using a clean microfiber towel, remove excess residue
- Repeat steps 1-3 as necessary
Recommended Products
Invalid password
Enter