S1 is a premium, hydrophobic shampoo that provides not only spectacular cleaning ability but also a unique hydrophobic effect that will last for weeks. It's suitable for vehicles both with and without existing protection and will extend the lifetime of previously applied coatings and sealants with a layer-on-layer effect. The biggest advantage of this product is how easy the car is to keep clean after it has been used. S1 is primarily designed for cars, but it also works on boats, motorcycles, golf carts, semi-trucks, bicycles, and lawnmowers.
Pure:est S1 provides lower friction than your average shampoo thanks to its silicone properties. This is significant since it’s the friction that creates swirl marks! As usual, make sure you have a good amount of water in your wash mitt. For the lowest risk of swirls, we always recommend using a washable mitt instead of traditional sponges.
To use S1, simply follow these easy steps:
Step 1: Preparation
Make sure you are wearing gloves and working in a shaded area away from direct sunlight. Fill a gallon bucket with 3/4 water and put 3 to 5 pumps of S1 into the bucket. Use around 10-12ml.
Step 2: Application
With a mitt, work directly onto the panel. Rinse off immediately after each panel. Repeat the process on the whole car, working one panel at a time. I Like to spray 1-2 sprays directly into the mitt while I am working. *Due to the high SIO2 contents, it is normal for Pure:est S1 to NOT produce a thick foam.
Step 3: Rinse
Rinse the vehicle thoroughly with high-pressure water and dry with your favorite microfiber.
Step 4: Post-treatment
This product is very simple to use but If the product dries on the surface, you may need to polish off the residue.
And there you have it - a simple and effective way to use S1, the premium hydrophobic shampoo from Pure:est. With just a few simple steps, you can clean your vehicle and provide a unique hydrophobic effect that will last for weeks. Remember to always wear gloves, work in a shaded area away from direct sunlight, and avoid allowing the product to dry on the paint.
Color: White.
Scent: Pure:est signature.
Nozzle: Pump (included).
Dilution: This product can be diluted with water.
Avoid storing the product in freezing conditions.
Other: None of our products contain PFAS (high fluorinated agents)
Earn [points_amount] when you buy this item.
PURE:EST | S1 Hydrophobic SiO2-infused Car Shampoo
- Unit price
- /per
Free shipping over $125. Code: FREESHIP
Earn Reward Points With Every Order
Pairs well with
Your details are protected and safe with us.
Adding product to your cart
S1 is a premium, hydrophobic shampoo that provides not only spectacular cleaning ability but also a unique hydrophobic effect that will last for weeks. It's suitable for vehicles both with and without existing protection and will extend the lifetime of previously applied coatings and sealants with a layer-on-layer effect. The biggest advantage of this product is how easy the car is to keep clean after it has been used. S1 is primarily designed for cars, but it also works on boats, motorcycles, golf carts, semi-trucks, bicycles, and lawnmowers.
Pure:est S1 provides lower friction than your average shampoo thanks to its silicone properties. This is significant since it’s the friction that creates swirl marks! As usual, make sure you have a good amount of water in your wash mitt. For the lowest risk of swirls, we always recommend using a washable mitt instead of traditional sponges.
To use S1, simply follow these easy steps:
Step 1: Preparation
Make sure you are wearing gloves and working in a shaded area away from direct sunlight. Fill a gallon bucket with 3/4 water and put 3 to 5 pumps of S1 into the bucket. Use around 10-12ml.
Step 2: Application
With a mitt, work directly onto the panel. Rinse off immediately after each panel. Repeat the process on the whole car, working one panel at a time. I Like to spray 1-2 sprays directly into the mitt while I am working. *Due to the high SIO2 contents, it is normal for Pure:est S1 to NOT produce a thick foam.
Step 3: Rinse
Rinse the vehicle thoroughly with high-pressure water and dry with your favorite microfiber.
Step 4: Post-treatment
This product is very simple to use but If the product dries on the surface, you may need to polish off the residue.
And there you have it - a simple and effective way to use S1, the premium hydrophobic shampoo from Pure:est. With just a few simple steps, you can clean your vehicle and provide a unique hydrophobic effect that will last for weeks. Remember to always wear gloves, work in a shaded area away from direct sunlight, and avoid allowing the product to dry on the paint.
Color: White.
Scent: Pure:est signature.
Nozzle: Pump (included).
Dilution: This product can be diluted with water.
Avoid storing the product in freezing conditions.
Other: None of our products contain PFAS (high fluorinated agents)